Incidences - Airzone FLEXA 3.0 Manuel D'instructions

• 2 pipes / 4 pipes
Mode Demand
Off
Stop
Air
Cooling
Radiant
mode
Off
Air
Heating
Radiant
mode
Off
On
Dry mode
Off
On
Ventilation
Off
Note: In this configuration, the indoor unit will remain in Standby mode once comfort has been reached in all zones
•
Activation delay. It allows to set a delay time in the power on of the production unit, configurable in minutes, from 0
to 7. (Default preset to 3 minuts).
•
LWT temperatures.
is not configured to work automatically, allowing the imposition of working temperatures).
temperaturas for the heatting and cooling modes of the aerothermal unit. Selectable values depends on each
particular aerothermal unit. Default presets are:
•
Air in cooling mode: 10 ˚C
•
Radiant in cooling mode: 18 ˚C
•
Air in heating mode: 50 ˚C
•
Radiant in heating mode: 35 ˚C
• (Only available in installations with AZX6GAW XXX control gateways)
DHW function.
Domestic Heat Water (DHW) function in the systems connected to the CCP. Activated by default.
•
Cooling mixing valve
operation of your installation depending on whether or not you have a cooling mixing valve.
Select Manual in the case of having cooling mixing valves in your installation, in which case they must be set at 18°C.
If the installation does not have a cooling mixing valve, select Auto so that the installation works automatically with
the temperature read by the system. By default it is set as Manual.

INCIDENCES

If an error message is shown, you can check both the Installation Manual and the Self-diagnosis section. Please visit Myzone
web: myzone.airzone.es/productos/
FRIO_Y CALORB_W
-- --
ON --
ON --
ON --
-- ON
-- ON
-- ON
ON --
-- --
(Only available in installations with gateway AZX6GAW[XXX] provided that the aerothermal unit
(only available in installations with aerothermal gateway).
Control Relays
AIRE_Y RADIANTE_Y
-- --
ON --
-- ON
-- --
-- --
-- --
-- --
-- --
-- --
AIRE_W RADIANTE_W
-- --
-- --
-- --
-- --
ON --
-- ON
-- --
-- --
-- --
It allows to set the LWT
It allows to turn on/off the
It allows you to configure the
ES
EN
FR
IT
PT
DE
33