Assembly And Connection Evaluation - Airzone FLEXA 3.0 Manuel D'instructions

ASSEMBLY AND CONNECTION EVALUATION

Check the following aspects:
- The state of the LEDs of the main control board and the rest of control elements. Check the self-diagnose section of
the data sheet of the elements.
- The main control board LEDs of opening dampers light up sequentially.
- If all the thermostats are powered.
Important: In the main control board, check the correct performance of D3, D11 and D19 LEDs and motorized elements.
Meaning
Main control board
D3
activity
Main control board
D11
power
Association channel:
D19
active
Open dampers
Close dampers
ES
EN
FR
IT
PT
Blinking Green
DE
Solid Red
Solid Red
Solid Green
Solid Red
25