Operation - Degometal GO 61 Consignes De Sécurité Et Mode D'emploi

4. OPERATION

Mandrel Protrusion Adjustment
Note: Trigger by two action design (Action A and Action B), Action A for fastening
the insert nut with light force, Action B for reversing the screw mandrel, you will
get harder when do action B.
Screwing and setting the insert nut onto the screw mandrel:
Offer up insert nut, push straight against the screw mandrel with hand with light
1)
pressure, the insert nut will screw onto screw mandrel automatically. (See Fig.
Above left one).
Put the insert nut into the application first, moves the screw mandrel into the insert
2)
nut squarely. (See Fig. Above right one).
Action Ⅰ
Insert nut screws onto the mandrel automatically without
pulling the trigger.
Action Ⅱ
Pull the rigger lightly, getting position A, the insert nut
deformed.
Action Ⅲ
Keep pulling the trigger toward Position B, the screw
mandrel reversed off the application.
www.degometal.com
18