Go 61 : Presentation - Degometal GO 61 Consignes De Sécurité Et Mode D'emploi

1. GO 61 : PRESENTATION

Capacity: Blind rivet nuts from M3 to M10
●
Tool supplied with mandrels from M3 to M10 in metric.
Mandrels in inch are available to purchase.
Oil should be applied properly to extend the life and
●
improve the work efficiency.
● Push the insert nut lightly on the end of the mandrel, the
insert nut will screw onto the mandrel and stop
automatically.
● Trigger by two action design (Action A and Action B), A
for fastening, B for reversing, improve the stability of the
tool.
● Easy maintenance and operation, up to 6,000 pcs of
threaded insert per shift.
Item No. Pull Force Stroke Air Pressure Capacity
100 000 611 18.3 KN
The tool is supplied with the standard accessories:
One set of nose piece with set nut,
●
Drive shaft from M3 to M10,
●
● Stroke regulation pin.
0-7mm 5-7 bars
www.degometal.com
Weight
1.92Kg
M3 to M10
15