Roger Technology B70/1DC Instructions Et Consignes Pour L'installateur page 62

4
Updates of version P2.00
1. Maintaining the functions of version r1.65, the memory of FLASH has been expanded from 64k to 256k in view of
future developments
2. Added connector to plug in the WiFi module (for future use)
3. Improved management of persistent AP command
4. Improved management of guaranteed closure
5. The position recovery mode can now also be activated with PED command
5
Technical characteristics of product
MAINS POWER VOLTAGE
MAXIMUM MAINS POWER
ABSORPTION
INRUSH POWER
FUSES
CONNECTABLE MOTORS
MOTOR POWER SUPPLY
MOTOR TYPE
MOTOR CONTROL TYPE
RATED MOTOR POWER
MAXIMUM MOTOR POWER
MAXIMUM POWER,
FLASHING LIGHT
FLASHING LIGHT DUTY CYCLE
COURTESY LIGHT POWER
GATE OPEN LIGHT POWER
MAXIMUM ACCESSORY
CURRENT ABSORPTION
OPERATING
TEMPERATURE
SOUND PRESSURE
DURING USE
PRODUCT DIMENSIONS
(1) BH30/500/HS/115 - BH30/600/115 - BH30/600/HS/115 - BH30/800/115 - BH30/804/R/115 -
BM30/300/HS/115
115V AC
The total of the absorption values of all the accessories connected must not exceed the
maximum power values shown in the table. The values are guaranteed with original
ROGER TECHNOLOGY accessories ONLY. The use of non-original accessories may lead to
malfunctioning. ROGER TECHNOLOGY declines all responsibility for incorrect or non-conforming
installations.
All the connections are protected by fuses (refer to the table). The courtesy light requires an
external fuse.
62
BH30/503/HS
BH30/603 BH30/803 BH30/504/HS
BH33/604 BH30/804 BH30/603/HS
BH30/604/HS
230 V~ ± 10% 50 Hz (B70/1DC/115: 115 V~ ± 10% 60 Hz)
130 W 140 W
300 W 450 W
F1 = 15A (ATO257) motor power circuit protection
F2 = 2A (ATO257) accessories power supply protection
F3 = T1A (5x20 mm) (B70/1DC/115: T2A (5x20 mm)) primary transformer protection
sinusoidal drive brushless (ROGER BRUSHLESS)
45 W 75 W
125 W 200 W
13 W 25 W
(24 Vdc) (24 Vdc)
100 W 230 V~ - 40 W 24 V~/dc (potential free contact)
7 W 10 W
(24 V ) (24 V )
dimensions in mm 200x90x45 weight: 0,244 kg
BM30/400 BM30/300/HS
140 W 120 W
350 W 280 W
1
24 V~, with self-protected inverter
120 W 45 W
350 W 110 W
25 W 13 W
(24 Vdc) (24 Vdc)
50%
3 W (24 V )
10 W 7 W
(24 V ) (24 V )
-20°C +55°C
<70 dB(A)
BH30/804/R
125 W
140 W
320 W
330 W
100 W
110 W
320 W
330 W
25 W 25 W
(24 Vdc) (24 Vdc)
10 W 10 W
(24 V ) (24 V )