Roger Technology B70/1DC Instructions Et Consignes Pour L'installateur page 61

2
Symbols
The symbols and their meaning in the manual or on the product label are indicated
below.
Generic danger
Important safety information. Indicates operations and situations
in which the personnel involved must pay close attention.
Dangerous voltage risk
Indicates operations and situations in which the personnel involved
must pay close attention to dangerous voltages.
Useful information
Indicates useful information for the installation.
Refer to the Installation and use instructions
Indicates the obligation to refer to the manual or original document,
which must be available for future use and must not be damaged
in any way.
Protective earth connection point.
Indicates the admissible temperature range.
Alternating current (AC)
Direct current (DC)
Symbol for the product disposal according to the WEEE directive,
see chapter 22.
3
Product description
The B70/1DC controller is a unit for the SENSORED control, with a high resolution encoder, of a ROGER brushless motor
for automated sliding gates.
Ensure that the parameter
automation system may not function properly.
ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to improper use
or any use other than the intended usage indicated in this manual.
recommend installing F4ES or F4S series photocells.
For further information, refer to the installation manual of the BH30 or BM30 automation
system.
is set correctly. If this parameter is not set correctly, the
61