GB
Cleaning and Maintenance / Disposal / Technical Specifications
6 Cleaning and Maintenance
• Before cleaning the appliance, make sure that the appliance is switched off and the power
supply unit is disconnected. Allow the unit to cool down.
• Clean the back massager with a slightly damp sponge only. Never use brushes, aggressive
cleaning agents, petrol, thinners or alcohol. Rub the seat dry with a clean dry cloth.
• Never immerse the appliance in water to clean it and ensure water cannot get into the
appliance.
• Wait until the device is completely dry before using it again.
• The removable cover can be washed at a maximum of 30 °C.
• Undo any kinks in the cable.
• Take care when rolling up the mains lead to avoid damaging it.
• You should ideally store the device in its original packaging and keep it in a clean, dry place.
7 Disposal
This product must not be disposed of together with domestic waste.
All users are obliged to hand in all electrical or electronic devices, regardless of
whether or not they contain toxic substances, at a municipal or commercial collection
point so that they can be disposed of in an environmentally acceptable manner.
Consult your local authority or your supplier for information about disposal.
8 Technical Specifications
Name
Model
Power supply unit
Operating time
Operating conditions
Storage conditions
Dimensions
Weight
Power cable length
Article No.
EAN Code
In accordance with our policy of continual product improvement, we reserve the right to
make technical and visual changes without notice.
16
: SILVERCREST Back massage cushion with control unit and cover
: TM 713
: IVP 1200-1000G (EU) / IVP 1200-1000B (GB)
input:
100-240 V~ 50/60 Hz max. 0.5 A
output: 12 V= 1.0 A
: max. 15 minutes (automatic shut-off)
: only use in dry rooms
: in a cool, dry place
: approx. 33 x 23 x 10 cm
: approx. 1.55 kg (not including power supply unit)
: approx. 2 m
: IAN 102534
: 4015588996344 (EU) / 4015588996351 (GB)