Skin Care After Application; Cleaning And Maintenance Of The Device - SilverCrest SHE 3 A1 Mode D'emploi

__KRA106439_B3.book Seite 11 Donnerstag, 14. August 2014 4:53 16

7.2 Skin care after application

• Apply body lotion, oil or cream to the skin.
• Do not apply any substances (e.g. deodorant) to the treated
areas, which could irritate the skin.
8. Cleaning and maintenance of the
device
WARNING!
~ Do not switch the device on if the roller unit has been re-
moved.
~ Do not use any astringent or abrasive cleaning agents.
~ None of the parts may be cleaned under water.
After every application
• Clean the roller holder 2 and the roller 1/8 after every
application.
1. Switch off the device.
2. Clean the roller holder and the rollers with the brush 10
after every application.
3. Place the protective lid 9 on the roller holder 2.
From time to time
• Wipe down the housing of the device with a damp cloth
when necessary.
• Check whether the surface of the roller 1/8 is undamaged.
To do so, turn the roller and check the surface carefully.
11
GB