Use With Skincare Products; Cleaning And Care - SilverCrest SSGRB 500 A1 Mode D'emploi

All manuals and user guides at all-guides.com
BB1$6B%ERRN 6HLWH 0LWWZRFK  -XQL    
8.3 Use with skincare
products
WARNING! Risk of injury!
~ Avoid contact between the skincare
product or the brushes and the area of
your eyes.
Use this function for cleansing or the remov-
al of make-up residues.
1. Remove larger areas of make-up.
2. Cleanse the areas around the eyes com-
pletely by hand.
3. Apply a thin layer of cleaning, peeling
or microdermabrasion cream to the
skin.
4. Moisten the brush attachment|6.
5. Press the brush attachment|6 against the
part of your face that you wish to treat.
6. Use the on/off button
desired setting.
7. Move the brush attachment|6 over the
skin in a circular motion, from the bot-
tom to the top. Application times per
use:
- on the forehead: 15 seconds
- on the nose and chin together:
15 seconds
- each cheek: 15 seconds.
8. After the application, rinse your face
with clean water.
NOTE: after use, the treated areas may be
slightly reddened.

9. Cleaning and care

~ Pull the power unit|8 out of the wall
socket before you clean the battery
charger|5.
~ Never clean connecting sockets, plugs
or other electrical contacts with water or
other liquids.
~ The battery charger|5 and the power
unit|8 must not be immersed in water or
other liquids. The battery charger and
the power unit must never be rinsed un-
der running water.
WARNING! Risk of injury!
~ Switch off the facial cleansing brush|1
every time before you clean it.
WARNING! Risk of material damage!
~ Do not use any astringent or abrasive
|2 to select the
cleaning agents.
~ Do not dry the brush attachments|6 us-
ing a hair drier.
NOTE: clean the brush attachments|6 after
each use. This prevents residues of skincare
products from collecting in the brush attach-
ments|6.
Brush attachments|
1. Remove the brush attachment|6.
2. Clean the brush attachment|6 with hot
water and gentle soap to remove any
deposits.
3. Shake off the excess water and allow
the brush attachment|6 to air-dry before
you use it again.
• Replace the brush attachments|6 if nec-
essary (see "Ordering brush attach-
ments" on page 11).
DANGER! Risk of electric
shock!
6
GB
9