Dome Controlling Keys - LUXSAR VDR840C Manuel D'installation

User's Manual
4.6.4

Dome Controlling Keys

The function keys used in Dome Control are described as follows.
Set / Go Preset
This key is used to enter the Dome Preset menu to set up certain position as a
preset and go to the predetermined preset positions for viewing.
Toggle Hint Screen
This function is used to avoid viewing the dome parameter information while
controlling dome camera. Press this key to hide the screen. Press it again to
redisplay the screen.
Iris Open
Use to open the Iris on the dome camera.
Focus Near
Use to focus the dome camera near.
Zoom In
Use to zoom the dome camera in. This function is for user to choose the viewing
area, more or less of it.
ESC
Use to leave dome control mode and return to live and full screen viewing mode.
34 VDR840C-440C_En_V1.2