Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User's Manual
3.5.3
Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and frame
rate. In normal circumstances, we strongly suggest you set the item to
<Standard>, the default. Below tables show the PPS and picture size under
<Standard> in Full-D1 mode, Half-D1 mode and CIF mode, respectively:
Normal PPS
3.125 PPS
3.5.4
To Record Event Video Only
If you want your DVR to record images with triggered alarm (both Alarm in and
Motion) only, and stop recording under normal circumstances, then follow the
steps to setup your unit:
•
Enter the OSD setup menu with correct password.
•
Enter <Record Setup> menu. Then select the item <ezRecord Setup>.
•
Select <Daytime Record> and setup this item to <No>, which means no
video will be recorded during daytime. When done, repeat the process to
set the <Night record> and <Weekend Record> as well.
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Overall Recording Condition
PLAY key on the front panel.
Halfl-D1 mode: 720 x 288 @ 50 PPS
Normal Size
11 KB
ezRecord Setup
NOTE: The recorded event video can be accessed not only through
the Event List but also through the Date/ Time Research using the
Event PPS
12.5 PPPS
22
Event Size
17 KB
2 Days
No
No
No
Fair
VDR840C-440C_En_V1.2
Publicité
Table des Matières
