Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User's Manual
Connecting Short-term Device
If you plan to install any short-term devices to the
and use them as part of the unit system, such as USB CD-ROM, USB Hard Disk
Drive, etc, make sure those devices are connected only after the unit is
powered up. Because
devices only after the power-up process is done completely.
2.4
Rear Panel Connections
There are various connectors on the rear panel used for
VDR840C/VDR440C installations. The following figure shows the connectors by
name; and followed by the detailed description of each connector.
LAN Connector (RJ-45)
The
Luxsar
the door of
USB Connector
There is a USB 2.0 port on the rear panel for users to connect external USB
devices to the unit, such as ThumbDrive
Audio In / Out (x2)
The
Luxsar
RCA connector is offered for connecting an audio source device (e.g. external
amplified microphone) to the unit; Audio Out RCA connector is offered for
connecting an audio output device (e.g. amplified speakers) to the unit.
Luxsar
VDR840C/VDR440C is capable of networking. The LAN port opens
VDR840C/VDR440C to Ethernet.
Luxsar
VDR840C/VDR440C provides two sets of audio recording. Audio In
Luxsar
VDR840C/VDR440C can recognize the external
®
or CD-ROM.
10
VDR840C/VDR440C
Luxsar
VDR840C-440C_En_V1.2
Publicité
Table des Matières
