Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User's Manual
4.3
Searching Recorded Video
The
Luxsar
recorded video by date and time or events. Entering the specific date and time
of the wanted video, the unit will then search for the matched video and play it
on the monitor. Alternatively, user can search event video by selecting channel
as well.
In live or playback mode, press SEARCH to enter the Search menu, which is
shown as follows.
4.3.1
Searching by Time
Follow the steps to search video by date and time.
•
Press SEARCH key to enter the Search menu; the From Time and End
Time of the available video is listed on top of the screen. The value is
unchangeable.
•
Use Direction keys to move the cursor for setting the Start Time; adjusting
the date and time values by UP / DOWN keys.
•
Press ENTER to confirm the settings or ESC to abort.
•
Move the cursor to <Begin Playback> and press ENTER to start playing
back the selected video.
•
Either press PLAY/STOP again to return to live video.
NOTE: If there is no available recorded video that matches your
specified time and date, the unit starts playback from the next available
video.
NOTE: The date/time information will be shown on the screen with a
DST icon if the Daylight Saving Time function is enabled. "S" indicates
summer time and "W" indicates wintertime.
VDR840C/VDR440C is capable of searching and playing back
Search
----------Search By Time----------
From:
End:
Start Time:
----------Search By Event----------
Select Channel:
CH1 CH2 CH3 CH4
26
2005/01/01 00:00:00
2005/05/01 00:00:00
2005/01/01 00:00:00
Begin Playback
Event List
VDR840C-440C_En_V1.2
Publicité
Table des Matières
