Viewing Live Cameras; Viewing Recorded Video; Key Usage In Playback - LUXSAR VDR840C Manuel D'installation

User's Manual
4.1.3

Viewing Live Cameras

Users are allowed to view live camera in versatile view modes, including
full-screen, 2×2, 3x3 and 4×4. The general operation under live mode is
described as follows.
To Freeze Live Image
Press FREEZE while viewing live image, the image pauses but the date / time
information does not, and the system clock continues running.
Press FREEZE to pause the live image; press FREEZE again to resume the live
camera view.
4.1.4

Viewing Recorded Video

To view recorded video, user can press PLAY/STOP key directly. When press
the PLAY/STOP key, the unit starts to continue playing back the recorded video
from the suspended point of record. If it is the first time to use the PLAY/STOP
key, the unit will playback from the very beginning of the record. Alternatively,
user can select records from the Search menu to play specific video. Refer to
Section 4.3 Searching Recorded Video for more information.
The Forward or Reverse speed indicator will be shown on the bottom-left of the
screen, when in the playback mode.
The general operations in playback mode are described as follows.

Key Usage in Playback

The key usage is slightly changed in playback mode. Following is the key usage
found in playback mode.
LEFT (Reverse Playback)
The key is used to reverse the recorded video while the unit is playing back.
Press the key repeatedly to increase the speed of reverse playback by 1×, 2×, 4
×, 8×, 16×, or 32×.
24 VDR840C-440C_En_V1.2