Daylight Saving Time - LUXSAR VDR840C Manuel D'installation

Date / Time Display
Users are allowed to choose to set the date / time OSD displays in 1 or 2 rows.
Use the UP / DOWN keys to change the setting. The default is to display the
date / time OSD in one row.
Date Display Mode
This function allows user to set the OSD display type of the date / time. There
are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>.
represents "Year", "M" represents "Month" and "D" represents "Day".
Move to the item and press ENTER, the option starts blinking. Use UP / DOWN
keys to change the setting. The default setting is <Y/M/D> in both NTSC / PAL
formats.
Time Display Mode
User can choose to set the time format to <12 hour> or <24 hour>. Use the UP /
DOWN keys to change the format. The default setting is <24 hour>.
Date / Time Order
The item is used to set the order of date / time display to <Date First> or <Time
First>. Use UP / DOWN keys to change the setting.
3.4.2

Daylight Saving Time

Daylight Saving Time
The item is for those people who live in certain regions to observe Daylight
Saving Time. Select <ON> to enable, or <OFF> to disable the function.
If the function is disabled, the DST Start / End time and DST Bias will be grayed
out and cannot be accessed.
VDR840C-440C_En_V1.2 19
User's Manual
"Y"