Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DEFAULT CONFIG!" will be shown on the screen. Press ENTER to confirm the
selection, then the unit starts to format the hard disks and load the factory
default settings, or press ESC to abort. We strongly recommend to backup your
programmed configuration before making any changes on Record Mode
settings.
even one window hasn't connected with a camera and displays no video, that
window still wastes pps. But if you select <ezRecord> for setting the unit, those
windows with no cameras connected to them will not be recorded, in other
words, the pps will not be wasted.
3.5.2
Schedule Setup
The Schedule Setup is used to set the day and night time, or weekend recording
schedule. Select <Schedule Setup> from the Record Setup menu and press
ENTER; the following menu is displayed.
1. Day Time Start
2. Day Time End
3. Night Time Start
4. Night Time End
5. Weekend Schedule
6. Weekend Start
7. Weekend End
•
Make appropriate changes of the start time of Day and Night Time using
Direction keys.
•
Press ENTER to confirm the settings or ESC to cancel.
•
If you want to have a weekend record, choose <YES> to enable the
Weekend Schedule in advance and then set the Weekend Start/End time.
•
Press ESC to back to previous page.
VDR840C-440C_En_V1.2
NOTE: After changing the Record Mode setting, the warning message
"This will FORMAT ALL HARDDISKS and LOAD THE FACTORY
NOTE: The total PPS is shared by viewing windows (by 4, 8 or 16
windows, depends on the model you have purchased), which means,
Schedule Setup
AM 06:00
PM 06:00
PM 06:00
AM 06:00
Fri 18:00
Mon 06:00
21
User's Manual
YES
Publicité
Table des Matières
