Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
General System Setup
The
Luxsar
operations through the front panel easily. The following subsections introduce
the general operations of the unit.
The regular displayed OSD information and its displayed positions are shown as
following figure. The channel title will be displayed on the top-left side of the
window, either in full screen mode or in multiple channel mode. The current
operating mode, including Call mode, Dome-Control mode, Playback mode.
Freeze mode and Sequence mode, will be displayed on the bottom-left side of
the screen. And the date/ time information will be display on the bottom-right
side.
Ch4
Playback
3.1
Front Panel Introduction
The front panel controls enable user to control the unit and preset the
programmable functions.
3.1.1
LED Definition
The
Luxsar
follows.
Power LED (Green)
The LED lit during the period when the correct power is connected.
VDR840C-440C_En_V1.2
VDR840C/VDR440C allows user to access some general
VDR840C/VDR440C LEDs on the front panel are described as
2005/11/09 PM04:31:22
Power LED
REC LED ALARM LED
NETWORK LED
13
User's Manual
Publicité
Table des Matières
