Sauder 409128 Manuel D'instructions page 22

Step 17
1
D28
Groove
Insert the LARGE DRAWER SIDES (D28 and D29)
å
at an angle into the slot at each end of the LARGE
DRAWER FRONT (R).
3
Fasten the LARGE DRAWER BACK (D151) to the LARGE
å
DRAWER SIDES (D28 and D29). Use four BLACK 1-9/16"
FLAT HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D954) inserts into
å
the groove of the LARGE DRAWER BACK (D151).
Repeat this step for the other drawers.
å
Page 22
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D29
R
D151
D28
D954
VIEW THE T-LOCK BOX VIDEO
2
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D954) into the grooves in
å
the LARGE DRAWER SIDES (D28 and D29) and LARGE
DRAWER FRONT (R).
D29
409128
With the palm of
your hand, tap the
DRAWER BOTTOM
down into the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D954
D28
D29
R
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(16 used in this step)
www.sauder.com/services