Sauder 409128 Manuel D'instructions page 23

Step 18
Insert a SLIDE CAM (RR) into the LARGE DRAWER SIDES (D28 and D29).
å
Fasten the DRAWER SLIDES (BB) to the LARGE DRAWER SIDES (D28
å
and D29). Use four GOLD 5/16" FLAT HEAD SCREWS (YY) through
holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Fasten a PULL (NN) to the LARGE DRAWER FRONT (R). Use two
å
SILVER 1/2" MACHINE SCREW (XX).
Repeat this step for the other large drawer.
å
BB
2
3
SILVER 1/2" MACHINE SCREW
(4 used for the PULLS)
www.sauder.com/services
Open end
1
R
NN
XX
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
RR
D29
D28
YY
409128
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
1
BB
2
3
RR
Open end
Page 23