Sauder 409128 Manuel D'instructions page 21

Step 16 Step
Fasten the TOP (E) to the BACKS (J and H). Tighten four
å
TWIST-LOCK® FASTENERS.
Fasten the TOP (E) to the UPPER ENDS (A and B). Tighten
å
eight HIDDEN CAMS.
Turn two CORD CLIPS (MM) into the bottom surface of
å
the TOP (E).
MM
www.sauder.com/services
H
J
A
B
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
E
A
J
B
409128
®
FASTENER
Dowel end
Maximum
Arrow
210 degrees
Minimum
190 degrees
Page 21