For Awekas; Setup Wi-Fi Connection; Step For Enter The Setup Interface - Bresser 7003500 Mode D'emploi

5. In the setup UI that mention in section 7.2, select the weathercloud in first or second row of the Weather
server setup section then key-in the Station ID and key that assigned by weathercloud.

6.4 FOR AWEKAS

1. You have the possibility to use a weather service of a third party provider, as shown here with the
example of AWEKAS.
2. Enter the following web address in the address bar of the web browser for the 'AWEKAS' service:
https://join.awekas.at
3. Fill in all the necessary information.
4. Make a note of the information: Username, Password, Geographic latitude (Latitude) in decimal
degrees (e.g. 48.30591), geographical longitude in decimal degrees (e.g. 14.2862).
5. NOTICE! Use a valid e-mail address for registration. Otherwise the service can not be used.
6. Detailed instructions for setting up AWEKAS are also available for download:
http://www.bresser.de/download/7003500
7. Enter the AWEKAS Server Information on the Setup page as follows:

7. SETUP WI-FI CONNECTION

7.1 STEP FOR ENTER THE SETUP INTERFACE

1. To activate AP mode, press
2. Press / key to enter OTHER SETTING SECTION
3. Press key to enter the sub menu
4. Press / key to select ENABLE ACCESS POINT (AP mode), then press
5. Use the smart phone, tablet, or computer to connect the console through WI-FI.
6. In PC / Mac choose WI-FI network settings or In Android / iOS choose setting
console's SSID: PWS-XXXXXX in the list and it will need several second to connect.
PWS-XXXXXX
PC (Windows 10) WI-FI network interface
7. Once connected, enter the following IP address into your Internet browser's address bar, to access the
setup interface of the console: http://192.168.1.1
URL:
Station ID:
Station key:
key to enter the MENU SETTING SCREEN. (SECTION 4.9.8)
Enter the server URL: http://ws.awekas.at
Enter username
Enter password
PWS-XXXXXX
Android WI-FI network interface
88
key to start the AP mode
WI-FI to select the