Calibration Setting - Bresser 7003500 Mode D'emploi

4.9.6.3 SET CHANNEL(S) ALERT
1. In the CH 1~7 rows, press
different channel alert setting screen.
2. Press / to adjust the value or on / off alert.
3. Press / to select different setting value.
4. Press / to select different row of the setting.
5. Once finished, Press
screen or press [ home ] key for back to normal
screen.
4.9.6.4 OTHER ALERT FUNCTIONS
Sub item
Reset all alert values
Disable all alerts
Alert Activated
4.9.7

CALIBRATION SETTING

In this section, press
key to enter
until back to the alert
Operation / Description
1. Press key to show the confirmation screen
2. Press / key to select Yes (to reset all values) or No (to go back)
3. Press key to confirm the action.
1. Press key to show the confirmation screen
2. Press / key to select Yes (to disable all values) or No (to go back)
3. Press key to confirm the action.
Press key to show the list of the activated alert.
/ key to select indoor, outdoor sensor, channels or other setting.
79
EN