Safety; General Safety Notes - Kessel GTF1000 Mode D'emploi

2

Safety

2.1

General safety notes

WARNING
This pump contains electric charges and controls
rotating mechanical system components. Non-com-
pliance with the operating instructions may result in
considerable damage to property, personal injuries
or even fatal accidents. IEC 60364 applies for all
electrical work on the pump.
WARNING
The pump must be supplied through a residual-cur-
rent-operated protected device (RCD) with residual
current of not more than 30mA. It must be ensured
that the electric cables as well as all other electri-
cal pump components are in a faultless condition. In
case of damage, the pump may on no account be
put into operation or must be stopped immediately.
Route electrical cables in such a way that they do
not become kinked and are strain-relieved. Only use
mains cables with the prescribed cable cross-sec-
tion.
016-212_04
NOTICE
Disconnect system from energy sources!
Ensure that the electrical components are discon-
nected from the electrical power supply during
the work.
17 / 76