Notes On This Manual - Kessel GTF1000 Mode D'emploi

1

Notes on this manual

The following conventions make it easier to navigate the
manual:
Symbol
[1]
(5) Position number 5 from the adjacent figure
...
Check whether
manual opera-
tion has been acti-
vated.
Press OK.
System is ready
for operation.
see "Safety",
page 17
Bold type
Variants or additional information (e.g.
Italics
applicable only for ATEX variants)
Technical information or instructions
which must be paid particular attention.
16 / 76
Explanation
See Figure 1
Action step in figure
Prerequisite for action
Action step
Result of action
Cross-reference to Chapter 2
Particularly important or
safety-relevant information
The following symbols are used:
Icon
Observe the instructions for use
Warns of a hazard for persons. Disregarding
this warning can lead to very
WARNING
Warns of a hazard for per-
sons and material. Disregarding
this warning can lead to seri-
CAUTION
ous injuries and material damage.
Meaning
Isolate device!
CE marking
Warning, electricity
serious injuries or death.
016-212_04