Before Using The Device; Delivery Status; Elements Of The Device - Gloria MULTIJET 36V Mode D'emploi


In case of longer breaks in operation
and after use, switch off the device at
the main switch / device switch (A)
and pull the mains plug.
CAUTION
RISK OF INJURY FROM FLYING PARTS!

Do not start or operate the device if
bystanders are in the danger zone.

Start or operate the device as
described in the operating instruc-
tions.

The ON/OFF-switch (A) must never
be fixed or short-circuited.

Only clean during daylight or with
adequate artificial lighting.

Never use the device during rain.

Never clean if others, in particular
children or animals, are in the area!

During cleaning, pay attention to
safe and solid position.
3

Before using the device

This chapter contains information
about the delivery status.

3.1 Delivery status

The device is shipped as standard as
follows:


Spray gun

Spray pipe

Spray gun holder

"4 in 1 nozzle"

Sprinkler

Intake filter

Pressure hose

Coupling for water connection

Filter seal

5,0 Meter intake hose incl. 2 x coupling

1 x user manual and product inform a tion
Any accessory parts are individually packed.

3.2 Elements of the device

A ON/OFF-switch at the device
B Battery charge indicator
C Operating mode button with display
(spray, eco, clean)
D Union ring to secure the spray pipe
E Spray pipe
F "4 in 1 nozzle" (needle/ 2 x flat jet
nozzle, turbo mill)
G Intake filter for suction from open
containers
H Intake hose (3/8"; 5.0 m) with
connecting coupling
I Pressure hose
J Sprinkler
K Trigger locking mechanism
L Trigger on the gun for spray jet
M PowerControl-button
N Spray gun
O Release pressure hose
P Holder for foam set
Q Water connection for intake hose
R Filter seal
S Coupling for water connection
T Spray gun holder
U Charger
V Coupling for pressure hose
28
device