Calibration Of The Thermostat Rtl (Sensor Unit) - oventrop Unibox RTL Notice D'utilisation

Unibox RTL
(3)
Indicator line
12.4 Calibration of the thermostat
RTL (sensor unit)
The thermostat RTL (sensor unit) is factory cal-
ibrated. A perfect function of the Unibox RTL is
only guaranteed if it is correctly calibrated.
Should you have changed the calibration, pro-
ceed as follows to recalibrate the thermostat
(see Illust. 21 on page 39):
• Turn the sensor unit to position "3" (instal-
lation position; see Illust. 13 on page 34).
The figure "3" must be in line with the
indicator line.
Illust. 21: Position of the indicator line
(1) Indicator line
• The distance between the beginning and
end of the sensor unit must be approx. 40
mm (see Illust. 22 on page 39).
102273580-V4.06.2020
Illust. 22: Distance between the beginning
and end of the sensor unit
1
Appendix
39