General Information; Validity Of The Operating Instruction; Type Plate; Extent Of Supply - oventrop Regumaq X-25 Notice D'utilisation

Controller X-25/X-45
1.

General information

The original operating instructions were drafted
in German.
The operating instructions in other languages
have been translated from German.
Other relevant documents
f Also consult the operating instructions of
the fresh water station used by you.
Regumaq X-25
www.oventrop.com/qr/1381125
Regumaq X-45
www.oventrop.com/qr/1381140
138116080-V01.04.2020
General information
1.1 Validity of the operating
instruction
These operating instructions are valid for the
controllers of the Oventrop fresh water stations
Regumaq X-25 and Regumaq X-45.

1.2 Type plate

The type plate is located under the connection
panel cover (see section "Controller terminal
assignment" in the operating instructions of
your fresh water station).

1.3 Extent of supply

• Controller
• Operating instructions

1.4 Contact

Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com
Technical services
Phone: +49 (0) 29 62 82-234

1.5 Declaration of conformity

Oventrop GmbH & Co. KG hereby declares that
this product complies with the basic require-
ments and other relevant provisions of the EU
Directives concerned.
The declaration of conformity can be obtained
from the manufacturer.

1.6 Symbols used

Highlights important information and
further explanations.
Action required
f
• List
1. Fixed order. Steps 1 to X.
2.
Result of action
Z
EN
13