Medion P85444 Notice D'utilisation page 362

25.9. Viewing software information
The software version and radio identification number of the device are shown
under INFO.
25.10. Setting the display lighting
You can configure the display lighting under BACKLIGHT:
– Dim the display in standby or operating mode after a pre-determined time
– Display brightness
Setting the dim time during operation
 Select POWERON TIMEOUT: and press OK to confirm. Select ON, 10, 20,
30, 45, 60, 90, 120 or 180 seconds and press OK to confirm.
Display brightness during operation
 Select POWERON LEVEL and press OK to confirm. Set your preferred
brightness, HIGH, MEDIUM, LOW, and press OK to confirm.
You can also set the display brightness during operation using the
the remote control.
The brightness of the control dials cannot be changed.
Setting the dim time in standby mode
 Select STANDBY TIMEOUT: and press OK to confirm. Select ON, 10, 20, 30,
45, 60, 90, 120 or 180 seconds and press OK to confirm.
 You can also set the display brightness during standby mode using the
button on the remote control.
Setting the display brightness in standby mode
 Select STANDBY LEVEL and press OK to confirm. Set your preferred brightness,
MEDIUM, LOW, and press OK to confirm.
DE
FR
NL
ES
IT
EN
button on
363