•
Current date
•
PTY information
•
Radio text
16.1. Setting radio stations
Press the
or
OK dial on the device to set the radio frequency.
Press and hold the
search. The automatic search starts either backwards or forwards, depending on
which button was pressed. The search stops automatically at the next station
received. Press and hold the
continue searching.
16.2. Storing radio stations
The FM radio has 40 memory slots.
Once a radio station has been saved, the station's memory slot is shown
on the display during playback.
Press and hold the
the device until the list of memory slots is shown on the display.
Then select a memory slot from 1 to 40 and press OK to confirm. The radio
station has been stored.
To call up the radio station again, press the
or the FAV/
OK on the remote control or the OK button on the NAV/OK dial to play the
station.
16.3. Main menu in FM radio mode
Press the MENÜ button on the device or the
call up the menu for FM radio mode.
16.3.1. Search settings
Under SCAN SETTING, confirm the prompt STRONG STATIONS ONLY? with
YES for the radio to search only for stations with a strong signal.
NO for the radio to also search for stations with a weak signal.
•
16.3.2. Audio setting
Under AUDIO SETTING, confirm the prompt LISTEN IN MONO ONLY? with
YES to play radio stations in mono. Use this setting when there is weak
•
reception.
NO to play radio stations in stereo.
•
350
button on the remote control several times or turn the NAV/
or
button on the remote control to start an automatic
or
button on the remote control or the FAV/
button on the device and select the station from the list. Press
button on the remote control again to
button on the remote control
button on the remote control to
button on