Skandika SF-2390 Instructions De Montage Et Mode D'emploi page 33

Step 8
Fix the handlebars (12) with the screws (27), curved washers (22) and nuts (28) on the rear seat unit as
shown.
Connect the handpulse wire (20) to the wire (29) coming out of the handlebars (12).
Step 9
Attach the right pedal (10) onto the right crank arm (25R) and tighten it by turning it clockwise. Afterwards
fix the left pedal (11) accordingly on the left crank arm (25L, to be screwed in anti-clockwise direction).
The pedals are marked with "R" (right) and "L" (left). Fix the pedal strap on the pedals (if not already pre-
mounted) and adjust the strap according to your feet/shoe size.
33