Optika Italy SZ Serie Mode D'emploi page 34

Rotating the horizontal arm
1. Loosen the horizontal arm fixing knob ④ and
rotate the arm, then tighten again the knob. (Fig.
61)
• NOTE: 180° rotation of the microscope with
respect to the base could cause a rollover of
the entire system.
8.11.3 SZ-STLX
Moving the horizontal arm
1. Unlock the knob on the right side of the horizontal
arm ①. (Fig. 62)
2. The arm can be extended or shortened according
to specific needs. (Fig. 63)
Page 34
④
①
F ig. 60 F ig. 60
F ig. 61 F ig. 61
F ig. 62 F ig. 62
F ig. 63 F ig. 63