Optika Italy SZ Serie Mode D'emploi page 31

8.10 Use of illumination (SZ-ST2/3/7/8)
1. Turn the transmitted light knob ① in order to turn
ON/OFF or to change the intensity of the transmit-
ted light LED. (Fig. 48)
2. Turn the incident light knob ② in order to turn ON/
OFF or to change the intensity of the incident light
LED.
• It is possible to use both illuminations at the same
time.
Only for SZ-ST7 / SZ-ST8:
• Tilt and position the self-supporting arms of the
base ③ to optimally illuminate the sample. (Fig.
49)
• The arms can be placed individually in the desired
position.
8.11 Use of eye shields (SZO-B/T)
• Use with eyeglasses
Fold rubber eyeshields with both hands. Folded
eyeshields avoid scratching the lenses of eyeglasses.
(Fig. 50)
• Use without eyeglasses
Raise eye shields and observe at the microscope
placing eyes to the shields, avoiding external light to
disturb the observation. (Fig. 51)
②
③
Page 31
①
F ig. 48 F ig. 48
③
F ig. 49 F ig. 49
F ig. 50 F ig. 50
F ig. 51 F ig. 51