Mantel Requirements - Valor Madrona MFCS05 Directives D'installation

Dimensions & Clearances to Combustibles
27-1/4" (691 mm)
x
Gas line
connection
Hinged
point
control
access
door
26-11/16" (678 mm)
Front View
Casting Tolerances
Due to the nature of cast iron and concrete, dimen-
sional consistency may vary from one unit to the
next and some variation in surface fi nish and fl at-
ness is to be expected. We have done our best to
control and make allowance for this; however some
variation is inevitable.
Floor Requirements
When the appliance is installed directly on carpeting,
tile or other combustible material other than wood
fl ooring, the appliance shall be installed on a metal
or wood panel extending the full width and depth of
the appliance.
Mobile Home Floor Fixing
The Madrona stove must be fi xed to the fl oor
through the fl oor when used in a mobile home.

Mantel Requirements

The Madrona stove may be installed with a
combustible mantel provided clearances are
maintained as indicated above. Be aware that
although safe, some combustible materials and
fi nishes at the listed clearances may, over time,
discolor, warp, or show cracks. Care should be
taken when choosing materials—consult your
fi replace dealer.
All manuals and user guides at all-guides.com
A
Mantel
B
x
14-3/4"
(374 mm)
16-1/4"
(413 mm)
Right Side View
Corner Dimensions
Alcove Clearances
Combustible Mantel Clearances
Mantel 0–1"
Depth 'A' (0–26 mm) (51–127 mm)
Mantel 34"
Height 'B' (864 mm) (914 mm)
Ø 6-5/8"
venting
1" (26 mm) 4-5/8"
minimum (118 mm)
Centre of vent
Gas line connection point
3/8" NPT FEMALE at valve
Gas line access
point 10" (254 mm)
Minimum 61-1/8" (1553 mm)
31-1/4" (794 mm) minimum
26" (660 mm)
maximum
2–5" 6–18" 19–24"
(152–457 mm) (483–610 mm)
36" 38" 42"
(965 mm) (1067 mm)
Suggested gas line
access point through wall.
Route to avoid optional fan.
10" (254 mm)
Ø 6-5/8"
venting
Pipe supplied
with engine
(see engine
manual p. 18)
x
2"
(52 mm)
minimum
Sidewall
Top View
90°
Zero clearance
Front surface
of stove
3