Publicité
Technical Specification
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size D×W×H(mm)
Building-in Dimensions
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hotplate. As shown below:
L(mm)
W(mm)
590
520
Under any circumstances, make sure the Induction cooker hob is well ventilated
and the air inlet and outlet are not blocked. Ensure the Induction cooker hob is in
A×B (mm)
H(mm)
D(mm)
60
56
HES 62 – HES6D
4 Zones
220-240V~ 50/60Hz
7200W
590X520X60
560X490
A(mm)
B(mm)
560+4
490+4
+1
EN-27
X(mm)
50 mini
+1
Publicité
