Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
2.
If kickback occurs, the accessory may:
2.1 pass over a body part, causing a seriously injury;
2.2 wrench the user's arm causing muscle or joint injuries; and
2.3 strike bystanders.
3.
Use clamps or a vice to hold down smaller workpieces.
4.
Use special care when working on corners, sharp edges or flexible
material. These workpieces have a tendency to snag the grinding
accessory.
5.
Only use grinding accessories designed for the tool.
6.
Support large panels to minimize the risk of pinching the grinding
accessory. Large panels may sag under their own weight. Place
supports under the panel on both sides of the cutline. Place other
supports under the rest of the panels to prevent them from falling after
the cut.
VIBRATION PRECAUTIONS
1.
This tool vibrates during use. Repeated or long-term exposure to
vibration may cause temporary or permanent physical injury. Take
frequent breaks when using the tool.
2.
If you feel any medical symptoms related to vibrations (such as
tingling, numbness, and white or blue fingers), seek medical attention
as soon as possible.
3.
Wear suitable gloves to reduce the effects of vibration.
4.
DO NOT use this tool before consulting a physician if one of the
following applies:
a. Pregnant
b. Impaired blood circulation to the
hands
c. Past hand injuries
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Visit www.princessauto.com for more information
5 in. Air Angle Grinder
d. Nervous system
disorders
e. Diabetes
f. Raynaud's Disease
8844029
9
Publicité
Table des Matières
