Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
3.3 Keep the air hose away from heat, oil, sharp edges or moving parts.
3.4 Do not wrap the air hose around the tool as sharp edges may pierce
or crack the air hose. Gently coil the hose and either hang on a
hook or fasten with a device to keep hose together when storing.
4.
A damaged or disconnected air hose under pressure may whip
around and inflict personal injury or damage the work area. Secure the
compressor's air hose to a fixed or permanent structure with clamps
or cable ties.
POWER TOOL PRECAUTIONS
Tool accessory is a general term that refers to drill bit, saw or cutting
blades, grinding wheel, etc. as appropriate for the tool.
1.
Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is dangerous
and can cause an injury. A qualified technician must repair and verify
the power tool is operating correctly, before it can be used.
2.
Do not cover the air vents.
3.
Disconnect the power source before installing or servicing the tool.
4.
Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. Excessive pressure is
the cause if your tool runs smoothly under no load, but roughly under load.
5.
Keep hands and fingers away from the work area. Any part of body
contacting the tool's working parts could cause an injury.
6.
Only use accessories that are specifically designed for use with the
tool. Ensure the accessory is tightly installed.
7.
Never touch the tool accessory or workpiece during or immediately after
use. They may be hot and could inflict a burn injury.
8.
Never use a tool with a cracked or worn tool accessory. Change the
tool accessory before using it.
GRINDING TOOL PRECAUTIONS
WARNING! Some surfaces contain materials which can be toxic.
When working on materials that may contain lead, asbestos, copper
chromium arsenate or other toxic materials, extra care should be
taken to avoid inhalation and minimize skin contact.
1.
Only use a grinding wheel that exceeds the maximum RPM of the tool
(see Specifications).
Visit www.princessauto.com for more information
5 in. Air Angle Grinder
8844029
7
Publicité
Table des Matières
