Wall-Mounted Assembly With Assembly Rails - Tuxhorn tubra-FRISTA KL Instructions De Montage Et D'utilisation

5.2

Wall-mounted assembly with assembly rails

Art.-Nr. 907.75.02.00
Last updated 2022/08/29
Mark the drilling dimensions as per the
above drawing and drill with  10 mm.
Top rail: 4 attachment points
Bottom rail: 2 attachment points
Insert the rawl plugs.
Tighten the assembly rails
Suspend the station on the prepared
threaded pins using the upper holding eyes.
Secure with washers and nuts
Align.
Tighten nuts.
Fit and tighten the fixing nuts.
- 11 -
GB