Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
A s s e m b l y
4.1
General description
The heating circuit station can be installed and operated in many different installation posi-
tions, provided that the pump shaft is horizontal.
4.2
Wall-mounted assembly
10
Art.-Nr. 966.20.27
Last updated 2022/02/28
Remove securing springs [3].
Lift the feed and return lines
and remove them from the
Pull out angle [10].
Remove the rear insulation
shell.
Mark attachment points of
the mounting bracket [10] to
the wall and drill two ø10 mm
holes.
Place the dowel and tighten
the mounting bracket [10]
with the screws and washers.
Align mounting bracket [10]
horizontally.
Slide the rear insulation shell
onto the mounting bracket
[10].
Insert the feed and return line
in the mounting bracket and
secure with the locking
springs [3].
- 7 -
GB
Publicité
Table des Matières
