MSI MEG Z790 ACE Manuel D'utilisation page 49

JUSB5~6: USB 3.2 Gen 2x2 Type-C Front Panel
Connectors
These connectors allow you to connect USB 3.2 Gen 2x2 20Gbps Type-C connector on
the front panel. The connector has a foolproof design. When you connect the cable, be
sure to connect it with the corresponding orientation.
⚠
Important
To achieve USB PD 60W charging for JUSB6, PD_PWR1 connector needs to be
∙
connected to the power supply unit.
∙ JUSB6 doesn't support USB 2.0 device.
JUSB3~4: USB 3.2 Gen 1 Connectors
These connectors allow you to connect USB 3.2 Gen 1 5Gbps ports on the front panel.
10 11
1 20
⚠
Important
Note that the Power and Ground pins must be connected correctly to avoid possible
damage.
JUSB5~6
Pin Signal Name
1 Power
3 USB3_RX_DP
5 USB3_TX_C_DN
7 Ground
9 USB2.0+
11 USB2.0+
13 Ground
15 USB3_TX_C_DN
17 USB3_RX_DP
19 Power
47
USB Type-C Cable
USB Type-C port on
the front panel
Pin Signal Name
2 USB3_RX_DN
4 Ground
6 USB3_TX_C_DP
8 USB2.0-
10 Ground
12 USB2.0-
14 USB3_TX_C_DP
16 Ground
18 USB3_RX_DN
20 No Pin