Buttons
Jumpers
Switches
LED Features
Back Panel
Connectors
I/O Controller
Continued from previous column
∙ 1x Power button
∙ 1x Reset button
∙ 1x Clear CMOS jumper
∙ 1x OC safe boot jumper
∙ 1x Slow mode jumper
∙ 2x Low temperature booting jumpers
∙ 1x EZ LED Control switch
∙ 1x Multi-BIOS switch
∙ 1x 4-pin RGB LED connector
∙ 3x 3-pin ARGB Gen2 LED connectors
∙ 4x EZ Debug LED
∙ 1x 2-Digit Debug Code LED
∙ 1x Clear CMOS button
∙ 1x Flash BIOS button
∙ 1x Smart button
∙ 2x LAN (RJ45) ports
∙ 3x USB 3.2 Gen 2 10Gbps Type-A ports (From Z790
chipset)
∙ 4x USB 3.2 Gen 2 10Gbps Type-A ports (From Hub-
GL3590)
∙ 1x USB 3.2 Gen 2 10Gbps Type-C port (From Z790 chipset)
with DisplayPort Alt Mode
∙ 2x Thunderbolt 4 USB-C ports
∙ 2x Mini DisplayPort Inputs (for Thunderbolt 4 pass
through)
∙ 2x Wi-Fi Antenna connectors
∙ 5x OFC audio jacks
∙ 1x Optical S/PDIF Out connector
NUVOTON NCT6687D-R Controller Chip
Continued on next column
19