MSI MEG Z790 ACE Manuel D'utilisation page 59

⚠
CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JARGB_V2
connector provide different voltages, and connecting the ARGB 5V LED strip to the
JRGB connector will result in damage to the LED strip.
⚠
Important
If you connect ARGB Gen1 and ARGB Gen2 LED strips into the same connector,
∙
it may cause issues. Please do not mix ARGB Gen1 and ARGB Gen2 LED strips
together.
∙ It is recommended that you install LED strips with the same specification to achieve
the best effects.
Always turn off the power supply and unplug the power cord from the power outlet
∙
before installing or removing the addressable RGB LED strip.
Please use MSI's software to control the extended LED strip.
∙
57