Manfrotto MVG460 Instructions page 8

GB
5.2 Balance Adjustment of the Rolling Axis
a. Tighten the tilt axis positioning lock ①, release the roll axis positioning lock ②, and
observe the camera tilt state.
b. Loosen the cross arm lock screw ③, slide the cross arm
position.
c. Tighten the cross arm lock screw
stable, it means balanced.
5.3 Balance Adjustment of the Panning Axis
a. Tighten the pan axis positioning lock ①, loosen the pan axis positioning lock ②,
keep the handle part of the gimbal parallel to the ground and the vertical arm parallel to
the ground, and observe the camera rotation after the releasing.
b. Loosen the vertical arm lock screw ③, slide the vertical arm
camera position.
c. Tighten the vertical arm lock screw
stable, it means balanced.
④
to balance the camera
③ and tilt the camera to the left or right, if it stays
④ to balance the
③ to rotate the pan axis to any angle, if it stays
6
Power ON/OFF
⚠
Before powering on the gimbal, need to unlock
all the axis positioning lock.
Long press the power button, release it when the
display shows
7
Download the Manfrotto gimbal app.
Download Manfrotto gimbal app.
8
Connecting App
(1) Turn on the mobile phone Bluetooth and start the gimbal.
(2) Open the App, and connect to MVG460 according to the App prompts. After the
connection is successful, you can control MVG460 on the App.
Detailed Manual
Download the detailed user manual from official website manfrotto.com
8
Power
button