PRO-POINT 9081548 Mode D'emploi page 8

9081548
result in a pump failure and injure the user or bystander. It may
also damage the pump.
INJECTION INJURY
DANGER! Seek immediate, professional medical treatment
if fluid penetrates your skin. It may feel like a pricking or
sting. Do not wait for the appearance of symptoms. A toxic
reaction can occur from the exposure. Delay in treatment
can lead to amputation or death.
Inform the medical staff that you have a fluid penetration injury as soon
as you arrive at the medical facility. The severity of the symptoms will
depend on the type of fluid injected. Bring the Safety Data Sheet for the
fluid with you to the medical facility if possible.
INJECTION PRECAUTIONS
Fluid can penetrate the skin at 100 PSI pressure. Fluid escaping under
pressure from the tool has sufficient force to penetrate your clothing
and skin. Follow the precautions below to avoid an injection injury.
1. Always check for leaks wearing a face shield, safety goggles,
rubberized gloves and protective clothes.
2. Release all pressure from the system before you inspect it.
3. Do not use your hands to detect a leak. Use a large piece of wood,
cardboard or paper and watch for discolouration.
4. Replace damaged parts with identical manufacturer's components
to ensure it is rated to handle the pressure.
AIR TOOL PRECAUTIONS
1. Use only clean and dry compressed air as a power source.
Contaminated or moist air will gradually damage the tool.
2. Install an in-line shutoff valve or regulator to allow immediate
control over the air supply in an emergency, even if a hose is
ruptured.
3. Discontinue tool use if it does not work properly or air is leaking.
Tag or mark the tool as 'defective' or 'out of service' until repaired.
4. Check the manufacturer's maximum pressure rating for air tools
and accessories. Compressor outlet pressure must be regulated
Assistance available at www.princessauto.com or 1-800-665-8685
PNEUMATIC/HYDRAULIC SHOP PRESS V1.0
Page 8