Hazard Definitions - PRO-POINT 9081548 Mode D'emploi

V1.0
SPECIFICATIONS
Press Capacity
Press Type
Ram Travel
Working Range
Bed Width
Overall Height
Pressure Rating
Material
INTRODUCTION
The workshop press is designed for light industrial use or for home
use. Perform straightening, stamping and bending with this powerful
hydraulic press. Features an H-frame design that makes it perfect for
removing or installing bearings, bushings, gears, ball joints, pulleys,
universal joints and more.
The press features a pneumatic foot control .
SAFETY
WARNING! Read and understand all instructions before
using this tool. The operator must follow basic precautions
to reduce the risk of personal injury and/or damage to the
equipment.

HAZARD DEFINITIONS

Please familiarize yourself with the hazard notices found in this manual.
A notice is an alert that there is a possibility of property damage, injury
or death if certain instructions are not followed.
DANGER!
WARNING!
Page 3
PNEUMATIC/HYDRAULIC SHOP PRESS
This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
This notice indicates a specific hazard or unsafe practice that could
result in a serious injury if the proper precautions are not taken.
Assistance available at www.princessauto.com or 1-800-665-8685
40,000 lb
Pneumatic/hydraulic
6 in.
3-5/16 to 18-1/8 in.
19-11/16 in.
39-13/16 in.
110 to 120 PSI
Steel Construction
9081548