Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9081548
CAUTION!
NOTICE!
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean,
well-lit and free of distractions. Place lights so you are not working
in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away
from the work area.
3.
Store unused tools properly in a dry, safe and secure location to
prevent rust, damage or misuse.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved
by the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2.
Wear the appropriate type of full-face shield in addition to safety
googles, as the work can create chips, abrasive or particulate
matter.
3.
Wear protective clothing and gloves designed for the work
environment, materials and tools.
4.
Wear steel toe footwear or steel toe caps to prevent a foot injury
from falling objects.
5.
The tool may contain high pressure. Use safety glasses and gloves
for protection during operation. Keep hands clear of the exposed
rubber portions of the hose.
6.
The air source used with this tool may cause hearing damage.
Wear ear protection gear to eliminate or reduce the noise.
Assistance available at www.princessauto.com or 1-800-665-8685
PNEUMATIC/HYDRAULIC SHOP PRESS
This notice indicates a potentially hazardous situation that may
result in minor or moderate injury if proper practices are not taken.
This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.
V1.0
Page 4
Publicité
Table des Matières
