PRO-POINT 9081548 Mode D'emploi page 6

9081548
5. Only use this shop press on a surface that is stable, level and not
slippery. The surface must be capable of sustaining the weight of
the shop press and the load.
6. Ensure that the workpiece is center-loaded and secure. An
unbalanced load may slip off the heel blocks or bed frame.
7. Keep hands and feet away from the bed frame area at all times.
8. Do not use the shop press to compress a spring or any other item
that could disengage and cause a potential hazard. Never stand
directly in front of a loaded press and never leave a loaded press
unattended.
9. Do not allow an untrained person to operate the press.
10. Do not use brake fluid or other improper fluid in place of hydraulic
oil. Avoid mixing different types of oil when adding hydraulic oil.
Only good quality hydraulic jack oil can be used.
11. Do not expose the press to rain, snow or inclement weather.
12. Bolt the press to the floor if it is to be used on bulky or
unstable items.
POWER TOOL PRECAUTIONS
1. Do not use any power tool with a malfunctioning power switch
or control. A power tool that fails to respond to the controls is
dangerous and can cause an injury. A qualified technician must
repair and verify the power tool is operating correctly, before it can
be used.
2. Shut the power off and disconnect the press from the power
supply (if possible) before making any adjustments, changing
accessories, cleaning, servicing or when storing. Such preventive
safety measures reduce the risk of starting the tool accidentally.
3. Check if the press's moving parts are misaligned or binding before
each use. Correct the issue before using the press to avoid an
injury or damage to the tool.
4. Avoid unintentional starts. Be sure that the regulator/throttle switch
is in the neutral or OFF position when not in use and before
connecting it to any air source.
Assistance available at www.princessauto.com or 1-800-665-8685
PNEUMATIC/HYDRAULIC SHOP PRESS V1.0
Page 6