Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3.
Avoid unintentional starts. Be sure that the regulator/throttle switch
is in the neutral or OFF position when not in use and before
connecting it to any air source.
4.
Never point the air stream or tool at any point of your body, other
people or animals. Debris and dust ejected at high speed can
cause an injury.
5.
Serious injury or death may occur from inhaling compressed air.
The air stream may contain carbon monoxide, toxic vapors or solid
particles. Never inhale compressed air directly from the pump or
air tool.
SPECIFIC SAFETY
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
The maximum load is 20 tons. Do not exceed this rated capacity.
Never apply excessive force to a workpiece and always use the
pressure gauge to accurately determine the applied load.
3.
Inspect the press before each use. Do not use if any component
is bent, broken, cracked, leaking or showing other damage. Do not
use the press after a shock load until a qualified technician has
examined the press.
4.
Check to ensure that all bolts and nuts are tight.
Page 5
PNEUMATIC/HYDRAULIC SHOP PRESS
Assistance available at www.princessauto.com or 1-800-665-8685
9081548
Publicité
Table des Matières
