Installer Menu: System - RISCO Group ProSound Guide D'installation Et De Programmation

Masquer les pouces Voir aussi pour ProSound:

Guide d'installation et de programmation (64 pages)

Table des Matières

Les langues disponibles

Miscellaneous: Siren

Quick Keys

Parameter

[8][2][2]

Strobe Blink

Defines the number of times that the strobe will blink in a minute .

[8][2][2][1]..[5]

Strobe Blink options

[1]: 20 times per minute.

[2]: 30 times per minute.

[3]: 40 times per minute (Default)

[8][2][3]

Strobe Arm Squawk

The time that the strobe will blink when the system is armed.

Note: If the sounder's squawk strobe is defined as NO (Refer to Adding / Deleting the

Outdoor Sounder section) this parameter will be ignored.

[8][2][4]

Siren LED

Defines the operation mode of the Status LED2.

[8][2][4][1]

Always On

The status LED2 is always on

[8][2][4][2]

Always Off

The status LED2 is deactivated

[8][2][4][3]

Follow Arm (Default)

The status LED2 is activated when any of the sounder selected partition is armed (Away

or Stay mode)

[8][2][4][4]

Follow Alarm

The status LED 2 is activated after any alarm condition

[8][2][5]

Proximity Level Response

Defines the time (seconds) for which a proximity violation must exist before the sounder

will trigger an anti approach alarm. The option 0 indicates that the proximity is deactivated.

[8][2][6]

Battery Load Test

Enables to set the time period that the ProSYS will automatically generate a Load test on

the battery.

[8][2][6][1]

Never

The system will not set a battery load test

[8][2][6][2]

Every 24 Hours (Default)

The system will set a battery load test every 24 hours.