Comelit 8472S Manuel Technique page 18

Warning:
• Install the equipment by carefully following the instructions given by the manufacturer and in compliance with the standards in force.
• All the equipment must only be used for the purpose it was designed for. Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for modifi cations made by
third parties for any reason or purpose, and for the use of accessories and materials which are not originals.
• All the products comply with the requirements of Directive 2006/95/EC (which replaced Directive 73/23/EEC and subsequent amendments), as certifi ed by the CE mark they carry.
• Do not route the riser wires in proximity to power supply cables (230/400V).
• Installation, mounting and assistance procedures for electrical devices must only be performed by specialised electricians.
• Cut off the power supply before carrying out any maintenance work.
• Connect the module-holder frame to earth (see Fig.).
• Do not press and hold the audio hook while the handset is lifted.
• The camera must not be installed opposite bright light sources, or in places where the fi lmed subject is against the light. To resolve this problem, we
recommend modifying the installation height of the camera, which is usually 160 - 165 cm, to a height of 180 cm and pointing the lens downward so as
to improve fi lming quality.
• Cameras with colour CCD sensor have poorer sensitivity in low light conditions than black/white cameras. We therefore recommend, in dimly lit
environments, that an additional light source is installed.
General information
External unit
Art. 4883
Art. 1205/B
Installing the external unit
Internal units
Art. 6302
Description of monitor
Mounting Art. 6302 with fl ush-mounted box Art. 6117
Mounting Art. 6302 with low wall-mounted box Art. 6320
Art. 2608
Installing door-entry phone Art. 2608
General installation and operating instructions
Operating distances table
Operation
Description of button functions and settings
Settings for monitor Art. 6302 and Style door-entry phone
Description of functions
Additional main or secondary monitors
Default button settings
General button programming warnings
Programming buttons for generic or coded actuator
Programming for intercom call
Programming/deleting intercom address (selective intercom only)
Programming buttons for intercom call
Programming buttons for other functions
Enabling (ON) / disabling (OFF) automatic response
Monitor ringtone selection
Direct programming of intercom call
Programming reset
Programming range/ringtones
Programming input IN1 for LED/alarm/lock-release/actuator indication
Special programming - Art. 4883
Wiring diagrams
SMK/018C Basic diagram for two-family kits Art. 8472S with cascade connection. Switching on/voltage check with system in standby.
SMK/013BC Basic diagram for two-family kits Art. 8472S with branch connection
SMK/014BC Diagram for two-family kits Art. 8472S extended with a second Art. 4883. Branch connection.
SMK/014AC Diagram for two-family kits Art. 8472S extended with a second Art. 4883. Cascade connection.
SMK/018/AC Diagram for two-family kit with additional power supply unit Art. 1395
SMK/019C Use of remote camera module Art. 1259C
SB2/AAR Connection of video amplifi er Art. 4833C
SMK/HCA Addition of a main monitor in parallel. Cascade connection
SMK/IC Addition of a main monitor in parallel. Branch connection
SMK/A20S Cascade connection of third main monitor with local power supply
SMK/A23S Branch connection of 2 main monitors and 2 secondary monitors with the same user code
SMK/A21S Cascade connection of 2 main monitors and 1 secondary monitor with the same user code
SMK/AAE Connection of additional door-entry phones with branch connection from monitor
SMK/AAD Connection of additional door-entry phones with cascade connection from monitor
SMK/FC Addition of a parallel door-entry phone, with branch connection from riser
SB/X3 Use for various purposes of button P1 (Art. 2608)
SB2V/AAK Connection of call repetition devices (Art. 1229 or Art. 1122/A)
Floor door call connection variant
18 18
19
19
19
19
21
21
22
23
24
24
25
25
25
26
26
26
26
27
27
27
28
28
28
29
29
29
30
30
31
32
33
114
115
116
117
118
119
120
120
121
121
122
122
123
123
124
124
125
125