Hilti PLT 300 Mode D'emploi page 21

▶ Check the accuracy of the PLT 300 after it has been dropped or subjected to other mechanical
stresses.
▶ When a tripod or wall mount is used, check that the PLT 300 is correctly and permanently mounted
and that the tripod is standing securely on solid ground.
▶ Keep the laser exit window clean in order to avoid measurement errors.
▶ Maintain the PLT 300 carefully. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect operation of the PLT 300. If parts are damaged, have
the parts replaced before use of the PLT 300. Poor maintenance is the cause of many accidents.
▶ Although the PLT 300 is designed for the tough conditions of jobsite use, as with other optical and
electronic instruments (e.g. binoculars, spectacles, cameras) it should be treated with care.
▶ Although the PLT 300 is protected to prevent entry of dampness, it should be wiped dry each time
before being put away in its transport container.
▶ As a precaution, check the previous settings or any adjustments you may have made.
▶ Fasten the battery compartment cover carefully so that the battery doesn't fall out. If battery
contact is lost the PLT 300 will switch itself off, possibly leading to loss of data.
3 Description
3.1 Overview of the product
3.1.1 PLT 300 1
*2100874*
Key
@
;
=
%
&
(
)
+
2100874
Grip
WLAN antenna
Battery compartment catch
Battery compartment cover
Lens cover and laser exit aperture
On/off buttons
Battery compartment
Battery
English 15